Application Notes

How to and use case guides

• How To | Making Softphone Calls Between Two Cores
• How To | Tracking Redundant Core Usage From a 3rd Party Control System
• How To | Configuring VLC Player with the WAN Transmitter component
• How To | Creating a PDF copy of a UCI
• How To | Using the PS-X As a Standalone Paging Mic
• How To | Example GPIO Configuration for Fire Alarm Relay with Digital TTL
• How To | Controlling a knob with incremental button commands
• How To | Entering the Offline Menu of Q-SYS Page Stations
• How To | Writing a .txt File To a Core Using Lua
• How To | Using Multiple Commands with JustAddPower Receiver Plug-in
• How To | Sending automation commands from a cinema server to a Q-SYS Core
• How To | Setting up an AES67 stream on a Dante device
• How To | Embedding audio to the NV-32-H HDMI output
• How To | Creating and Using Multi-Channel WAV Files for Q-SYS
• How To | Painting AD-DWL Speakers
• How To | Painting the Q-SYS NL-C4 and NL-P4 Network PoE Loudspeakers
• How To | Setting up SNMP for a DCP Processor
• How To | MP-MFC Input Level Control Setup
• How To | Pulling RTSP streams from PTZ-IP Series cameras using QDS 9.3.0 and above
• How To | Pulling RTSP streams from PTZ-IP Series cameras using QDS 9.2.1 and below
• How To | Using a third-party control system to dial from Q-SYS
• How To | Getting a list of pages in a UCI
• How To | Add, use, and remove markers in the Timeline component
• How To | Pull RTSP streams from Q-SYS NC Series cameras
• How To | Adding audio files to the Timeline component
• How To | Add a control track to a Timeline component
• How To | Connecting to a second remote IP subnet for VoIP lines
• How To | Add custom labels for Channel Group pages
• How To | Changing the Privacy, Exiting Privacy, and Offline images for Q-SYS cameras
• How To | Create PTZ camera preset buttons
• How To | Formating commands from Barco Alchemy to the JSD60
• How To | Return the length of a table in Lua
• How To | Populate a Combo Box or List Box with values using Lua
• How To | Wiring WCP-1 to the GPIO Input on a Q-SYS device
• How To | Configuring a Q-SYS network amplifier to drive a 70V load while in standalone mode
• How To | Setting dim and off timeouts for a TSC Series touch panel
• How To | Create a PDF copy of a UCI
• How To | Disable a button using Lua scripting
• How To | Selecting multiple files in Core Manager
• How To | Creating a touch screen timeout function in a UCI
• How To | Name a component in Designer
• How To | Disabling the popup number pad on a TSC touch panel
• How To | Showing TCP responses from third-party equipment in Block Controller
• How To | Access Sample Designs in Q-SYS
• How To | Using the config file from a DPM100 on a DPM300
• How To | Checking the Q-SYS version of a design file
• How To | Non-scripted methods of providing users with radio buttons in Q-SYS
• How To | Embedding audio to the NV-32-H HDMI output
• How To | Scripting a Wake-On-LAN (WOL) packet in Q-SYS
• How To | Scripting a delay in Q-SYS
• How To | Finding Windows 10 event logs
• How To | Exporting configurations from MP Install
• How To | Using GPIO configured as an analog input to control a Gain block
• How To | Tracking USB Mute and microphone mute with Q-SYS Control
• How To | Limiting the range of a Gain control
• How To | Testing External Control Protocol (ECP) commands with Telnet
• How To | Changing the CDN64 Dante Audio Bridge card IP address
• How To | Sending control changes via Softphone paging system
• How To | Transmiting a single stream to multiple Cores
• How To | Connect to the MP Manage app
• How To | Switch between -U and control firmware for Biamp/Symetrix (-B/-C) - Attero Tech
• How To | Configure the Attero Tech Axon C1 controller for use with the Audio Technica SmartMixer products
• How To | Find Hard Links from Designer on the computer
• How To | Tell if a Media Drive was successfully installed on the Core
• How To | I activate a Q-SYS Feature License
• How To | Add Software-based Dante to my Q-SYS design
• How To | Apply a CSS style to a UCI
• How To | Automatically select 3rd party cameras in the Zoom Rooms plugin
• How To | Configuring a Bluetooth friendly name
• How To | Change a volume knob or fader to an up/down button
• How To | Configure TLS support with Avaya Session Manager (SM) for Q-SYS Softphone
• How To | Control a Q-SYS Core via serial / RS-232
• How To | Control volume or gain changes via external control
• How To | Drive "up" and "down" controls for a projector screen
• How To | Get a key for -B/C mode on an Attero Tech device
• How To | Install the Software-based Dante feature license
• How To | Interpret the SNMP values from a Q-SYS Core
• How To | Make VOIP calls without a SIP server in Q-SYS
• How To | Monitor a third-party device in Q-SYS
• How To | Pass Mute Privacy and other Status information between the Core and a Crestron Microsoft Teams UC
• How To | Purchase a Software-based Dante feature license?
• How To | Read files using scripting
• How To | Write files using scripting
• How To | Set up Software Dante and Dante VIA to work together
• How To | Sum the stereo Booth output of a DJ mixer to a single CP12 loudspeaker
• How To | Tie a polygon to a Navigation Button in a UCI
• How To | Troubleshoot Softphone issues
• How To | Update the firmware on a Core 110f
• How To | Use the Attero Tech Axon C1 with the Room Combiner component
• How To | Use the dir.remove() Lua function to perform audio file cleanup
• How To | Wire a WCP-1 to an SPA series remote
• How To | Add CDN64 Dante cards to an actively running redundant system
• How To | Add the Wideline 8 (WL-3082) voice into a Q-SYS design
• How To | Add ISA Series amplifiers to a Q-SYS Core Processor with DataPort output cards
• How To | Ad-Hoc IP-to-IP calls from Core to Core
• How To | Avoid trigger play restarts
• How To | Change the names of Smartphone and MFC profiles
• How To | Change the USB input level on a Core 110f
• How To | Change the MP Manage Custom Logo
• How To | Connect a Shure MX412D or MX418D LED Switch to GPIO
• How To | Page from a Softphone or POTS telephone connection
• How To | Fix peripherals showing as "Missing"
• How To | Use Q-SYS PTZ cameras with third-party control systems
• How To | Send a Trigger on Startup of a Design
• How To | Distinguish faceplates on Q-SYS CIML4 and COL4 card
• How To | Fix Intermittent Atmos audio loss in a commissioned auditorium
• How To | Use the Room Combiner
• How To | Find missing Core in Q-SYS Configurator
• How To | Put a CXD amplifier into standby from a fire alarm system
• How To | Import Configurations with MP Install
• How To | Transfer a Configuration from an MP-M80 to an MP-M40
• How To | Transfer a Configuration from an MP-M40 to an MP-M80
• How To | Integrate MP-M with Fire Alarm Contact Closure
• How To | Find my devices on the network in QSD
• How To | Change the images for NV-32-H display images
• How To | Remove Dante devices from Dante Domain Manager (DDM)
• How To | Properly orient UCI on a touch panel
• How To | Connect stereo outputs to mono input
• How To | Control All Zones on MP-M Mixer from One Zone
• Awareness | LED Status - unD4O
• Awareness | LED Status - Axon A4Mio/A8Mio
• How To | Get controls on touch panel or UCI Viewer to work
• How To | Integrate Q-SYS with Dante / Audinate-based devices
• How To | Find the correct Q-SYS Camera settings for compatibility with Mersive Solstice Pod Conference Bridge
• How To | Fix PoE device not powering up when connected to a Q-SYS NS Series Network Switch
• How To | Allocate speakers for multichannel LPCM audio on NV-32-H
• How To | Fix Q-SYS device that only connects to the network briefly
• How To | Get the Attero Tech unDUSB Volume and Mute controls to work
• How To | Diagnose AES67 audio loss from Q-SYS Core processor
• How To | Configure Dante device in unIFY or Dante Controller
• How To | Use Toggle, Momentary, and Trigger buttons
• How To | Route the number of flows allowed by Software Dante license
• How To | Locate AES67 Receiver in Dante Controller
• How To | Open Q-SYS Help in QDS
• How To | Use the proper power-on/off sequence for Q-SYS Cores and peripherals
• How To | Fix Core that is suddenly not visible in Q-SYS Configurator
• How To | Send strings containing escaped characters to a third party device
• How To | Use the File Recovery Save Feature in Q-SYS
• How To | Set up a Q-SYS Core 110f/c HID Keyboard for a Mac
• How To | Import (insert, copy) Global Cache IP2IR GC-100 IR codeset JSON
• How To | Deal With A Limited Number Of Dante Flows
• How To | Set up Basic Axon C1 Functions
• How To | Control a projector screen control with 12v logic
• How To | Get sound from my Bluetooth® device
• How To | Integrate Q-SYS, Attero Tech, and Audinate (Dante) in a system
• How To | Do simple multi-zone/multi-room control with Axon C1
• How To | Control Standby of SPA amp via GPIO of a Core
• How To | Set up your MP-M User Profile for Mobile Remote Control
• How To | Use simple Command Buttons to control the Lyntec RPC panel via TCP/IP
• How To | Determine In-room Bluetooth audio amplification after Q-SYS Core requires an AEC reference mix tweak
• How To | Determine the GPIO connections for the Q-SYS Core 110f/c and I/O-8-Flex
• How To | MP Install / MP Manage > Smartphone Access Profile Setup for Mobile Remote Control
• How To | Use redundant Q-SYS Core Processor GPIO outputs to drive external relays
• How To | Drive 5-volt TTL on external devices from a Q-SYS GPIO output
• How To | Create a Simple Loading Bar for a UCI in Q-SYS Designer (Without Script)
• How To | Use MP-M 3rd Party Control using PuTTY
• How To | Setting a static IP address on Attero Tech devices
• How To | Use a PC Bluetooth dongle with a unD6IO-BT based on settings in unIFY
• How To | Use 3rd Party Control System Integration with Attero Tech
• How To | Control MP-M products via 3rd party control
• FAQ | Can the output voltage of my MP-M mixer be adjusted wirelessly?
• How To | Import a phone directory, or create a local editable one with Q-SYS softphone
• How To | Control multiple zones with the MP-MFC wall mount controller
• How To | Manage Q-SYS from a different VLAN
• How To | Monitor both QLAN and Dante networks from the same computer
• How To| Access Attero Tech AES67 Networking Guide
• How To| Avoid controlling Global Cache iTach Relay with momentary Custom Control buttons
• How To | Get Q-SYS to accept client matter codes for international dialing
• How To | Using dry contact/relay closures as an output
• How To | Access Application Guide for the NV Series Network Video Endpoints
• How To | Understand the details regarding Green Ethernet and Q-SYS
• How To | Set up a Q-SYS Core 110f and the Cisco CUCM call manager
• How To | Install Dolby® Atmos Cinema
• How To | Set up the GPIO on a Q-SYS I/O-8 Flex Channel Expander
• How To | Configure Q-SYS Core 510i in I/O mode
• How To | Set up the Cisco CUCM Call Manager 10.5 for Q-SYS
• How To | Access A/V to USB Bridging application guide
• How To | Enable External Control on DCP-100/300 via Ethernet
• How To | Create a Q-SYS Account
• How To | Use a Feature License
• How To | Optimize Windows PC's for AV Applications & USB Connection
• How To | Change the Network Gateway on legacy Attero Tech AES67 Products
• How To | Control volume in Zoom Rooms using Attero Tech unDUSB
• How To | Understand the meaning of Bluetooth® for Pro-AV
• How To | Install an Attero Tech Axon C1 faceplate
• How To | Configure single and dual port modes for the Attero Tech unDNEMO and unDNEMO-BT
• How To | Check for AES67 Support on Dante Device
• How To | Fix AES67 devices in unIFY show up in red with a line through them
• How To | Contact unBT2A in unIFY
• How To | Send audio to more places in Dante Controller
• How To | Control Axon C1 in a complex multi-zone/multi-room
• How To | Hear the tone output from the softphone or POTS
• How To | Tie individual Crosspoints from a Matrix Mixer to a Snapshot Bank in Q-SYS
• How To | Control a Sennheiser TeamConnect Ceiling 2 mic with Q-SYS
• How To | Replace a Legacy DPAQ Amplifier with a new DPAQ without changing the design connections and configuration
• How To | Enable the Cinema Library in Q-SYS Designer Software
• How To | Quickly determine how many licenses are needed for use in the Q-SYS Reflect sign-up process
• How To | Monitor 3rd Party devices with Q-SYS Reflect
• How To | Increase the number of System licenses in Q-SYS Reflect
• How To | Purchase Q-SYS Reflect?
• How To | Connect Q-SYS Core to Q-SYS Reflect
• How To | Update QDS to v8.x from v7.2
• How To | Create a ringing LED that only acts on incoming calls
• How To | Tell if JSD-60 unit contains a DI-84 Dolby/DTS decoder
• How To | Effectively troubleshoot network and SIP phone issues
• How To | Update username or email in QSC/Q-SYS account
• How To | Verify the Q-SYS certification status (certified, expired, in-progress) of a company or person
• How To | Update the firmware on a QSC CCR-100 close caption unit
• How To | Verify the IRC-28C is getting closed captioning
• How To | Verify Closed Captioning is coming from the playback server
• How To | Find more local Q-SYS classroom training sessions
• How To | Room combining with the the MP-M series mixers
• How To | Construct a baffle wall
• How To | Find IP address conflicts on the IRC-28C
• How To | Install Windows 10 USB driver for JSD-60 JSD-100 PCA-100
• How To | Accessing a Q-SYS Core from a remote IP subnet
• How To | Configure closed captioning with IRC-28C on Dolby server
• How To | Configure closed captioning on IRC-28C with GDC server
• How To | Integrate streaming services with the MP-M Series mixers
• How To | Verify the IRC-28C is receiving closed captions
• How To | Use DCA1824 and DCA1644
• How To | Update close caption gear (ADA) on IRC-28, CCR-100, and CCH-100
• How To | Properly set up subwoofers for cinema
• How To | Send automation commands from my cinema server to a QSYS Core
• How To | Understand why the JSD volume switches to 0.0
• How To | Send external commands from a Dolby IMS / Doremi cinema server
• How To | Use the IRH-280/281 head set with hearing aids
• How To | Understand the difference between bridging and paralleling on QSC Cinema DPA Amplifiers
• How To | Set a Q-SYS NV-32-H as an encoder or decoder
• How To | Paint a QSC AD-S series loudspeaker
• How To | Verify that a Q-SYS NS Series network switch has the right Dell firmware
• How To | Fix a UCI that will not deploy to an iPad
• How To | Get AES67 audio to a Q-SYS core processor from an Atlona OmniStream AV encoder
• How To | Configure IP SIP port with Avaya phone system
• How To | Filter Q-SYS traffic in a network switch
• How To | Configure PIM-SM multicast routing on a Cisco SG300 switch
• How To | Set up a VLAN ID in Q-SYS Designer
• How To | Set up DSCP and PIM mode on a Hewlett Packard HP3800 switch
• How To | Integrate Avaya IP Office Server Edition 10 with VoIP and Core 110f
• How To | Activate Feature License offline with Entitlement ID and without internet
• How To | Activate Feature License offline without Entitlement ID.
• How To | Activate a feature license using the online portal
• How To | Manage QSC Licensing entitlements through the online portal
• How To | Customize the user control interface on the TSC-55w-G2 touch screen controller
• How To | Customize the user control interface on the TSC-116w-G2 touch screen controller
• How To | Customize the user control interface on the TSC-80w-G2 touch screen controller
• How To | Connect to my Q-SYS system using the Crestron Modules
• How To | Configure the AES67 I/O components to work with another a manufacturer using AES67 other than Audinate
• How To | Discover AES67 streams transmitted by a Dante device on my network
• How To | Set the PTPv2 Grandmaster status of an AES67 device
• How To | Get DTMF tones to work on Cisco CUCM via the Q-SYS softphone
• How To | Set up ECP on a Q-SYS Core processor
• How To | Expose the pins in the Q-SYS Global Cache User Component
• How To | Design expansive Q-SYS networks using a WAN
• How To | Adjust Gain for a Dynamic Mic when using a standard Q-SYS CIML-4 Mic/Line Input Card
• How To | Install media drive for the Q-SYS Core 110f
• How To | Utilize QSC's AcousticPerformance Series loudspeakers
• How To | Utilize multiple Q-SYS Core 110f's processors in a large conferencing system
• How To | Use the SPA series plenum kit
• How To | Hook up a SPA series amplifier
• How To | Put the SPA series of amplifiers into standby
• How To | Set up CXD-Q amplifiers in stand alone operation
• How To | Wire a remote volume control to the SPA series of amplifiers
• How To | Integrate SIP Softphone with Q-SYS
• How To | Integrate AES67 with Q-SYS
• How To | Select the right power amplifier for my passive loudspeaker
• How To | Diagnose Q-SYS Softphone registration problems
• How To | Add an audio file and schedule a "Play-Message" Command to the Q-SYS Core
• How To | Change the position of the "Popup Box" on a UCI
• How To | Reduce the level at the Q-SYS core 110f POTS
• How To | Use GPIO Contact Closure to Trigger a Virtual Page Station Zone Selection and Talk Button in Q-SYS
• How To | Enable a new MTP-128 Feature Key for a Q-SYS Core
• How To | Implement a Hook Flash with the Q-SYS Core 110f
• How To | Set the HDMI/3G-SDI resolution on the Q-SYS conferencing cameras
• How To | Set the USB video resolution on the I/O to USB Bridge
• How To | Assign a UCI page tab to a Polygon Button on a UCI
• How To | Burn a CF module for the TSC-8
• How To | Set a Default Zone when using a PS-X Expander with a Page Station
• How To | Save a Q-SYS design file to the Core without it changing the current gain structure or other parameters
• How To | Activate a Feature License with a License String or FileUser using Offline Activation
• How To | Use the Patch Matrix
• How To | Find the country setting for the POTS interface in the Q-SYS core 110f
• Awareness| API responses are not received from Shure devices
• How To | Formatting a QRC command
• How To | Testing QRC Commands From A Computer
• How To | Allow Windows To Rescale unIFY Control Panel
• How To | How to configure LAG between Q-SYS NS Series Gen 2 switches
• How To | Determine Netgear M4250 (NS Series Gen 2) Network Switch Q-SYS Config Version
• How To | Capture PCAP on Q-SYS Core
• How To | Configuring IP reservations by MAC for Netgear M4250 (NS Series Gen 2) network switches
• How To | Update Firmware on Netgear M4250 (NS Series Gen 2) Network Switches
• How To | Routing audio using USB audio bridging when NV-21-HU USB-C DisplayPort (DP Alt Mode) is used
• How To | Update Firmware on Q-SYS NS Series Dell Switch
• How To | Clearing the cache for help.qsys.com in Chrome
• How To | Setting up Port Mirroring on an M4250 Switch
• How To | Changing the access username and password for Q-SYS Netgear NS Series Gen 2 M4250 Network Switches
• How To | Connecting to the Q-SYS Netgear NS Series Gen 2 M4250 Network Switches using the USB/RJ-45 console port
• How To | Converting a momentary button to a trigger using Lua scripting
• How To | Renaming Attero Tech unD Series products
• How To | Utilizing Teams CSS Design from Asset Manager
• How To | Enabling Power Delivery on NV-21-HU
• How To | Editing PIN rules on the Telephone Paging plugin
• How To | Activating Power Delivery on NV-21-HU
• How To | Check if the MTR component can reach the MTR PC device
• How To | Converting a momentary button to a trigger using Block Controller
• How To | Connecting to a Core with no OLED display after factory reset
• How To | Changing the color of a button using Lua scripting
• How To | Changing the color of a button using Block Controller
• How To | Locating and downloading Q-SYS Log Files
• How To | Updating Q-SYS Firmware
• How To | Testing/Verifying ECP messages from your PC
• How To | Disable a button using a Block Controller
• How To | Install Plugin from Asset Manager
• How To | Create a Certificate for Third-Party Controls on UC Platforms
• How To | Create a UCI Link for Zoom Rooms Third-Party Controls
• How To | Utilize the Zoom CSS Design from Asset Manager
• How To | Enable Third-Party Controls in Zoom Rooms
• How To | Accessing Plugin Help Content
• How To | Enable Spatial Audio For Microsoft Teams Rooms
• How To | Removing DDM Credentials/Configuration from a Q-SYS design
• How To | Changing AV Bridge names
• How To | Backing up and Restoring Licenses
• How To | Q-SYS License Activation
• How To |Insert a Variable in a String Using LUA
• How To | Making a button invisible using Block Controller
• How To | Making a button invisible using Text Controller
• How To | Saving a Custom EDID for use on HDMI sources
• How To | Converting a Trigger to Boolean using Block Controller
• How To | Setting up Sennheiser TeamConnect Ceiling 2 Microphone with Microsoft Teams Bundle
• How To | Changing USB Bridge Name
• How To | Using the Selector component to change pages on a UCI
• How To | Changing a fader from vertical to horizontal
• How To | Setting up AEC with a voice lift system
• How To | VisionSuite - Getting Started Guide
• How To |Creating a timed status bar without scripting
• How To | Using the Softphone Call Status Progress field to set a state with Block Controller
• How To | Making an Adjustable Time-Based Trigger without Scripting
• How To | Setting SPA-Q Series amplifiers for 70V / 100V operation?
• How To | Adding Files / Attachments to an existing case
• How To | Downloading Tech Support file from Q-SYS NS Series Gen 2 (M4250) network switches
• How To | Assigning a passcode to UCI Page
• How To | Configuring SPA-Q Series amplifiers for standalone use
• How To | Making multi-function page change buttons on a UCI
• How To | Forcing a firmware update on PTZ-IP Conference Cameras
• How To | Pasting a UCI element in the same position on a different layer
• How To | Adding a PIN for use with external control
• How To | Adding a NO/NC relay to any Core with GPIO outputs
• How To | Set up Control Link Server/Client
• How To | Assigning a UCI to an MTR for Room Controls
• How To | Outputting a Mediacast stream from HDMI 1 of NV-32-H
• How To | Painting AcousticDesign and AcousticCoverage Series ceiling mount speakers
• How To | Enable Spatial Audio in Zoom Rooms
• How To | Updating MP-M Series mixers using the pinhole reset
• How To | Using a Core 110f in I/O Peripheral Mode
• How To | Implementing CSS in UCI designs
• How To | Enable Auto Framing on Q-SYS NC Series cameras
• How To | Linking mute between multiple NM-T1 Microphones using Call Sync component
• How To | NV Series: Selecting the desired audio source for an HDMI Display
• How To | Installing Custom Plugins to Q-SYS Designer
• How To | MP-M Mixer Pinhole Firmware Update/Recovery
• How To | Find remaining file storage on a Core processor
• How To | Set a static IP address to a Core processor
• How To | Painting PL-DC Series Loudspeakers
• How To | Submitting Log files from a SeerVision Server
• How To | Accessing Core Manager
• How To | Adding speakers to a Q-SYS design
• How To | Assemble and Install a PS-TSCG3 Series Page Station
• How To | Replace the microphone on PS-TSCG3 Series Page Station
• How To | Adding Hard Links in Q-SYS Designer Software
• How To | Adding Q-LAN I/O to a design
• How To | Adding an Audio Recorder to a Q-SYS design
• How To | Saving a design to a Core
• How To | Q-SYS Partner Field Tech Checklist
• How To | Painting PL-CA Series Loudspeakers
• How To | Painting PL-LA Series Loudspeakers