Procedure

To use AES67 on a Dante device:

• Enable AES67 on the device in Dante Controller and reboot
• Create an AES67 multicast stream with the desired channels in it

The steps below show how this is done:

1. In Dante Controller, open Device View by double-clicking on the desired device name.
2. Click the AES67 tab. (This tab is only available to Audinate devices that support AES67)

3. Set the New option to “Enabled” and click Yes on the warning message.
4. Reboot the device. (Power cycling is also recommended)
5. Once rebooted, select Create Multicast Flow.

6. Select the AES67 Stream check box.

7. Select up to eight channels to be included in the stream.

8. Click Create.