Awareness | LED Status - Axon D2i

Gain insight into the functionality and features of the Axon D2i LED status indicator for better awareness and understanding.

Updated at June 19th, 2024

Information


The D2i is equipped with status reporting features. Upon power up, the front panel LEDs will light solid yellow then change white for 3 seconds upon succeeding. The device will then change to STATUS mode if no audio signal is present after 5 seconds. The LED states below are reflected when in STATUS mode. The status LEDs may be disabled using Attero Tech by QSC unIFY Control Panel.

LED State Status
Both Flashing Red Critical Boot Error (contact Tech Support)
Both Flashing White Identify
Both Flashing Blue MCU Updating
Both Flashing Green Factory Reset has been triggered
Both Flashing Yellow Factory Mode
Top White / Bottom Off Clock Master
Top Off / Bottom White Clock Synced
LED Status - States

When audio signal is present, the device will change to SIGNAL mode and the LEDs will show the following states. These states apply to both panel LEDs.

LED State Status
Off No Signal
Green Has Signal
Red Clipping
LED Status - Audio

For more information on the hardware and operations, refer to the Axon D2i User Manual.