FAQ | Does the Core 24f support I/O peripheral mode?
Learn about the compatibility of I/O peripheral mode with the Core 24f.
Answer
The Core 24f can be configured to operate as an input/output peripheral. In this mode, you add the I/O-Core 24f as an Inventory peripheral and then configure a separate Q-SYS Core processor to run your design.
Use the following steps for changing a Core 24f into an I/O Core 24f:
- Add I/O-Core 24f to the design from the Audio - Q-LAN tab in Inventory.
- Open Core Manager for the Core that will be used as a peripheral.
- Go to the Utilities page.
- Select Peripheral from the Mode drop-down.
- Click Switch