Awareness | Zoom Rooms Tested Third-Party Controllers
Discover what third-party controllers have been tested with the Q-SYS Room Control Application for Zoom Rooms..
Information
The following Third-Party Zoom Room Controllers have been tested and verified as functioning with the current Q-SYS Room Control Application on Zoom Marketplace at the firmware versions listed below.
| Application | Version |
|---|---|
| Q-SYS Designer Software | 9.10.1 |
| Zoom Rooms App | 5.17.5 or later |
| Zoom Rooms Controller App | 5.17.5 or later |
Controllers
| Manufacturer | Model | Device OS Firmware Version |
| Apple | iPad | 16.4.1 |
| Poly | TC8/TC10 | 4.1.3-211457 |
| Neat | NF19A1 | NFA1.20240 120.0109 |
| Logitech | Tap USB | 3.2.204 |
| Logitech | TAP IP | 1.12.184 |
| Generic | Android Tablet | Android 10 |
Computes
| Manufacturer | Model | Device OS Firmware Version |
| Apple | MacOS | 14.2.1 |
| Generic | Windows 64bit | Windows 10 |
| Poly | G7500 | 4.1.3-394009 |
| Logitech | Roommate | 1.11.221 |
Note
Controller performance may vary based on controller type and network configuration. Other hardware and firmware versions may also operate as expected. The information above is only what has been tested by Q-SYS.
Caution
When using an Apple iPad as your Zoom Rooms controller you must load the same CA Root certificate used to generate a certificate for the Q-SYS core to the iPad directly. There are various methods to do accomplish this, please contact your IT staff for support"