FAQ | What is the cable that ships with the MP-M40 and MP-M80 used for?

Find out what the cable that comes with the MP-M40 and MP-M80 is used for.

Updated at May 18th, 2023

Answer


The cable that ships with the MP-M series mixer is a 15 inch (381 mm) cable with 6-pin Euro Blocks wired to each end.  

The purpose of this cable is to function as an interconnect cable between the zone outputs of the MP-M (Mixer) and the line inputs of MP-A (Amplifier).  Each cable carries two channels of balanced audio from the mixer to the amplifier. 

Cable part number is WC-004089-01.